034 Motorsport - Audi B9 S4 Tuning - Stage 1 & 2 ECU Tunes
Select Additional Products
034 Motorsport - Audi B9 S4 Tuning - Stage 1 & 2 ECU Tunes.
Flash tune your Audi B9 S4 from home with 034 Dynamic+ software.
034 Motorsport Dynamic+ performance ECU tuning software for your Audi B9 S4 is simply incredible! Equipped with powerful & responsive EA839 3.0TFSI engine, the additional performance available is nothing short of astounding, with an additional +88 BHP & +268 Nm from the stage 1 tune! Flash tuning from home is simple and easy with your Dynamic+ software. Upgrade to stage 2 or stage 2 TCU files at anytime.
A full range of ECU & TCU tuning files are available for a variety of fuels 95, 98 and E85. Stage 1 includes FREE AL552 ZF8 transmission tune to handle the massive torque increase.
034 Motorsport has a rich history with the Audi B8 S4 and they have continued this with the B9 S4, currently holding the stock turbo quarter mile world record! The amount of work that has gone into this vehicle is nothing short of outstanding. Simply unmatched in the market for performance and quality of software engineering.
034 MOTORSPORT AUDI B9 S4 FIGURES
Stock: 350 HP / 500 Nm
Stage 1 95: 397 HP / 665 Nm +165 Nm
Stage 1 98: 431 HP / 768 Nm +268 Nm (from a stage 1!)
Stage 1 E85: 486 HP / 814 Nm (no hardware modifications required)
Stage 2 95: 454 HP / 734 Nm
Stage 2 98: 476 HP / 780 Nm
Stage 2 E85: 510 HP / 835 Nm
034 MOTORSPORT AUDI B9 S4 FEATURES
- AL552 ZF8: FREE ZF 8 tune with every stage 1 or 2 - included with all files
- AL552 ZF8: Stage 2 TCU tune (advanced features)
- Crackle overrun: FREE enhanced enabled in Dynamic mode
- True Launch control: Included in ECU tunes
- E85: Full stage 1 E85 enabled
- Speed limiter: removed
- Throttle mapping: Refined throttle mapping in all modes
- Thermal management: All factory safeguards remain
- RS start up: RS start up enabled
- Exhaust flaps: Flaps permanently open in Dynamic
- Amax shifting: Max speed shifting after launch
- Auto start stop - defaults to off
- Volumetric Efficiency - Redesigned & enhanced software
- Left foot braking - Enabled below 5,000 RPM
- Free revving - soft limiter removed
- Boost reporting - Real boost reported to MMI
- Torque reporting - Accurate torque reported to TCU
Stage 1 includes: 95 RON, 98 RON, E85, FREE ZF8 TCU tune & overrun - that is 5 files for the cost of a normal stage 1 tune. This is exceptional value.
FLASH TUNE YOUR S4 FROM HOME
034 Motorsport Audi B9 S4 3.0T ECU and TCU tunes are flashed directly through your factory OBD-II port using your 034Motorsport Dynamic+ End User Flashing Kit. This enables you to flash your ECU & TCU from the comfort of your own driveway.
You can receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for your vehicle, with ease in a small amount of time. No technical skills are required. It is simple and easy.
Add to cart: Dynamic+ End User Flashing Kit
FREE AL552 - ZF8 TCU TUNE
Included for FREE is the Dynamic+ Performance TCU Software for the AL552 8-Speed ZF8 transmission! To make the most out of your ECU tune a TCU remap was necessary. 034 Motorsport’s proprietary calibrations for the AL552 TCU safely and effectively raise the torque limits of the ZF8, allowing your car to make use of Stage 1 & 2 Performance Software. These two files work in harmony to produce a superior driving solution.
This free TCU file is unique to 034 and this in itself should save you close to $1,000 compared to any competition.
They have also added a stage 2 TCU file with extra features and benefits.
Add to cart: AL552 ZF8 Stage 2 TCU tune
034 AUDI B9 S4 TUNING PHILOSOPHY
The 034 Motorsport Dynamic+ ECU tuning software for your Audi B9 S4 is designed to transform your driving experience. Proprietary calibrations for the ECU safely and effectively increase the power output of the turbocharged V6 in a refined manner. The result is a significant improvement in acceleration and throttle response, without any sacrifice in driveability or reliability.
034 Motorsport Engineers developed special in-house tools that allowed direct access to the firmware and maps inside the factory ECU Bosch - MG1, this level of engineering is required to prevent work-arounds and band-aids that many other brands use. 034 Motorsport engineers calibrate the ECU by accessing the source of how the ECU controls the engine by making changes at the base level. This leads to a superior level of software calibration only available from 034 motorsport.
LETS PUT SOME CORN IN (E85)
The E85 calibration is not a flex-fuel style tune. The tune will work with E85 directly from the pump. This tune requires only E85 be pumped into the fuel tank. Gasoline blends and race fuel mixtures should not be used, and engine damage could occur if the incorrect fuel or octane is used. We strongly recommend an ethanol content gauge be used so that you can monitor the actual ethanol content at the pump you are using.
When switching fuels, it takes about 20-30 minutes of normal driving for the new tank of fuel to fully circulate through the system when filled at E. Please minimize load (don’t floor it!) until you have driven the car for at least 30 minutes. Ethanol content analyzers installed close to the fuel rail will also help you see when the ethanol has fully run through the system.
SOFTWARE FEATURES:
 |
 |
 |
|||
 |
 |
 |
|||
 |
 |
 |
034MOTORSPORT EA839 3.0T TURBOCHARGED PERFORMANCE SOFTWARE COMPARISON
| STAGE | FUEL | MAX HP | MAX TQ | MAX HP GAIN | MAX TQ GAIN | REV LIMITER* | SPEED LIMITER |
|---|---|---|---|---|---|---|---|
| Stock | 95 | 350 HP | 500 Nm | NA | NA | 6,500 RPM | 150 MPH |
| Stage 1 | 95 | 397 HP | 665 Nm | 99 HP @ 4,100 RPM | 172 Nm @ 4,000 RPM | 6,500 RPM | ∞ |
| Stage 1 | 98 | 431 HP | 768 Nm | 139 HP @ 4,100 RPM | 260 Nm @ 2,500 RPM | 6,500 RPM | ∞ |
| Stage 1 | E85 | 486 HP | 814 Nm | 180 HP @ 4,600 RPM | 345 Nm @ 2,500 RPM | 6,500 RPM | ∞ |
| Stage 2 | 95 | 454 HP | 734 Nm | 143 HP @ 4,600 RPM | 239 Nm @ 2,500 RPM | 6,500 RPM | ∞ |
| Stage 2 | 98 | 476 HP | 780 Nm | 170 HP @ 4,600 RPM | 305 Nm @ 2,500 RPM | 6,500 RPM | ∞ |
| Stage 2 | E85 | 510 HP | 835 Nm | 197 HP @ 4,600 RPM | 338 Nm @ 2,500 RPM | 6,500 RPM | ∞ |
***All figures obtained from 034's in-house 4x4 Mustang dynamometer
DYNAMIC+ ECU & TCU FEATURES
TRUE LAUNCH CONTROL
From the factory, conventional launch control strategies are not activated in the ECU. 034 Motorsport’s skilled Calibration team has properly engineered and implemented true launch control functionality to the EA839 and AL552 ZF8. Through OEM Calibration strategies of timing reduction, Boost Control PID optimization, and torque target management, the system is able to allow for a maximum 3k RPM launch targeting 22psi for up to 8 seconds, making for a strong and smooth launch! Unlike the factory ECU that tries to “push through the brakes” on a standing brake launch, the 034Motorsport Dynamic+ calibration will allow proper loading of the engine without pushing through the brakes as hard, and properly targets a specified RPM to launch at.
THERMAL MANAGEMENT SAFETY STRATEGIES
With increased power, comes increased heat. With increased heat, comes the need for additional management. For both charge air temperature and engine coolant temperature, 034Motorsport has implemented key safety features to keep your engine running optimally and safely in virtually any condition - just like the OEM calibration.
Charge Air Temp: When the charge temp exceeds 80*C there is a reduction in power output. When the charge temp exceeds 85*C there is a more significant reduction in power output. This charge temp limitation is there to prevent knock events, which can severely damage a motor. With these safety measures in place, you can confidently drive your car knowing the factory ECU has optimal performance and safety covered..
Coolant Temp/Fan Strategy: 034Motorsport calibrators have rescaled the coolant temperature targets and fan control strategies to target lower coolant temperatures when in higher heat conditions, allowing the car to run within a safe heat range rescaled for the added heat that comes from tuning the engine.
RS-STYLE STARTUP REV ENABLED:
Enjoy a nice start-up rev when turning the car on with our new RS-Style start-up program!
INCREASED POWER AND ACCELERATION DURING SHIFT EVENT:
034Motorsport tuning safely applies more power throughout the shift event, increasing overall acceleration and performance.
AMAX SHIFTING:
AMAX Shifting is a shifting strategy that stands for “Acceleration Maximum.” These gear shifts are the fastest and quickest possible for optimal acceleration . These are activated in shifting after launching your vehicle from a stop using launch control.
AMAX shift points are now optimized for specific RPM setpoints for Pump Gas ECU tunes, and Race Gas/Ethanol ECU tunes. Select the specific TCU file to match your current octane when flashing your TCU!
The S4/S5 has AMAX now activated in the 4>5 and 5>6 shifts where it was previously disabled from the factory. The SQ5 now has AMAX activated in all shifts from 1st through 6th where it was previously disabled from the factory.
ENHANCED CRACKLES IN DYNAMIC MODE:
034Motorsport engineers have enhanced the crackles for maximum auditory pleasure! Crackles can be toggled on or off via Drive Select. They will be on in Dynamic and off in Comfort, giving you the ability to crackle when you want, and cruise quietly when you don't. In Individual, crackles can be toggled on or off via Engine Sound. NOTE: Launch Control Only Works in True Dynamic Mode.
EXHAUST FLAPS PERMANENTLY OPEN IN DYNAMIC MODE:
From the Factory, Audi will open and close the exhaust flaps randomly, even in Dynamic mode. With 034Motorsport tuning, When set to Dynamic, the exhaust valves will now stay constantly open.
FREE REVVING IN NEUTRAL AND PARK:
The rev-limiter is now removed while in Neutral and Park. Impress friends and annoy those around you with limitless ease!
FUEL SYSTEM OPTIMIZATION:
While E85 provides substantial increases in power, it requires about 30% more fuel than standard pump gasoline per ignition cycle. Utilizing a variety of fuel stratified injection strategies, 034Motorsport calibrators have further optimized the factory fueling system to be able to adequately support full E85 on factory hardware for Stage 1 and Stage 2 tunes.
ACCURATE BOOST AND TORQUE REPORTING:
As with anything in life, it is always best to be truthful. This especially applies when it comes to reporting torque outputs in the ECU to the other control modules in the car, as well as displaying accurate boost readings to the driver via the boost gauge found on the Virtual Cockpit. With 034Motorsport Dynamic+ software, the ECU is reporting accurate torque values to critical systems like the TCU to ensure that all safety systems are intact in both control units, and the added torque from tuning is properly adjusted for when driving/shifting, including all safety systems designed to protect the engine and transmission.
START/STOP BUTTON MEMORY
The Dynamic+ Tuning options allow users to set memory for the system based upon preference. If you do not want the Start/Stop system to run, turn it off via the in-cabin button and the car will store that selection even after key cycling the car. This is done in a completely OEM fashion, helping enhance the overall experience of driving your car!
034MOTORSPORT B9 AUDI S4 3.0T STAGE DESCRIPTIONS
STAGE 1 AUDI S4 B9
034 Motorsport Stage 1 Performance Software for the EA839 3.0T engine running pump gas is engineered to safely increase the horsepower and torque with no hardware required. Due to the significant addition of torque from just Stage 1, the 034 Motorsport AL552 ZF8 TCU tune is mandatory to run in parallel with our ECU tuning.
In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in order to provide improved throttle response and allow for more precise throttle modulation and further control of the vehicle when driving on track.
Stage 1 95: 397 HP / 665 Nm +165 Nm
Stage 1 98: 431 HP / 768 Nm +268 Nm (from a stage 1!)
Stage 1 E85: 486 HP / 814 Nm +300 Nm (no hardware modifications required)
These figures are simply incredible and are the highest on the market, as 034 has spent the most time on this car compared to anyone else.
STAGE 2 AUDI S4 B9
034 Motorsport Stage 2 Performance Software for the EA839 3.0T engine is engineered to further increase horsepower and torque output over Stage 1 levels with the addition of a 034 Motorsport Intake System, an Upgraded Intercooler, and an Upgraded High Flow Catted Downpipe. As with all 034 Motorsport calibrations, the proprietary safety calibrations yield additional power from the 3.0T engine without an increase in harm to the factory Engine, Transmission, and Drivetrain. The resulting gains over stage 1 with this added hardware make for an even more profound transformation over Stock or Stage 1!
HYBRID TURBOCHARGER FILES
034Motorsport is actively developing Hybrid Turbocharger ECU files for the EA839 3.0T, and will be releasing them at a later date.
OH BY THEY WAY
034 Motorsport holds the world record for B9 stock turbo quarter mile.
034MOTORSPORT EA839 3.0T TURBOCHARGED PERFORMANCE SOFTWARE & HARDWARE REQUIREMENTS
| STAGE | REQUIRED MODIFICATIONS | RECOMMENDED MODIFICATIONS |
|---|---|---|
| Stage 1 95 |
|
|
| Stage 1 98 |
|
|
| Stage 1 E85 |
|
|
| Stage 2 95 |
|
|
| Stage 2 98 |
|
|
| Stage 2 E85 |
|
|
How to use the end user flash cable & software
- Receive welcome email (after purchase) with 034 software account and user guide
- Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
- Send 034 stock file details from software (very easy)
- Plug back into OB2 port & USB and flash tune your ECU / TCU
Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.
The reading / flashing and software process is not complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
Initial read time - 10 minutes
First flash time - 20 minutes
Flash back to stock - 10 minutes
Upgrading files (stage 1 to 2) - 5 minutes
Flashing between files and stages - 5 minutes
Download: 034 Motorsport Dynamic + user manual
What happens next?
- We will create a tuning order for you with head office
- We will post you the Dynamic+ tuning cable - Express post only
- Please wait and 034 tuning support will send you an account activation email. This contains instructions and links to download the tuning software.
- A user manual is available to download from every tuning product page
- You then proceed to take a read of your ECU/TCU and flash tune your vehicle
- 034 will provide direct support for you. You will be able to communicate with the software engineers
- Enjoy the transformation of your vehicle
Why purchase 034 Motorsport?
- Exceptional quality
- Passionate and devoted company
- Continual product development
- Excellent local and manufacturer support
- Extremely reasonable with pricing
- Huge selection of supporting products
- Superior software calibration
- Paypal, zip pay, afterpay, credit and debit
- Free express only shipping
- 30 day money back satisfaction guarantee
SUMAMRY
We believe 034 motorsport ECU and TCU files for the Audi S4 B9 to be the best in the market. We have priced the ECU and TCU files very competitively. You will not find better files on the market.
034 is not done with this vehicle and you can expect new updates for this vehicle just like the B8 S4.
Transform your drive with 034 Motorsport!
Please contact us to discuss pricing, discounts and package deals.
We will EXPRESS post you the cable and start a tuning order for you.
We will create your order as soon as you purchase the product. This means by the time you receive your tuning cable, you should already have your introductory email.
This is an email from 034 Motorsport which includes your user account, link to download software and user manual.
You may have to wait a day or two. Please also check your spam, updates and other email tabs for the email from 034 motorsport. If it still hasn't come after a couple of days please contact VAGPARTS. Please note weekends are not working days.
Windows laptop, internet connection, tuning cable and tuning account.
Please open the tuning software and identify your ECU and TCU. This is very fast. Once this information is uploaded 034 Motorsport will then notify you when your new tunes are ready.
It can be the same day or some other cases a working day or two. Sometimes files need to made and this involves human software engineers and time.
This just means a new ECU or TCU files needs to be uploaded to the server for you to flash tune. Please wait.
This is NOT a difficult process. If you have the ability to open and email and send an email, this is the same level of computer literacy needed.
The total time to tune the car is around 30 mins. Flashing between files, upgrading and so on once you have done the first installation is a couple of minutes.
You can email VAGPARTS Australia and 034 motorsport directly for tech support. When you email 034 you can speak to the software engineers and dedicated tuning support staff.
You may need to flash your car back to stock. You can do this by forcing the car to stock from 034 software.
Yes these are separate control units and need to be individually flashed.
This is NOT a difficult process. If you have the ability to open a email and send a email, this is the same level of computer literacy needed.
"A program for this control unit was not found". This is normal, it just means a file isn't ready for you to flash. Please wait and one will be uploaded to the server for you.