034 Motorsport - Audi S3 8V Tuning - Stage 1 & 2 ECU Tunes

034-103-2750
Many in stock
ECU TUNING
Australia wide - Express
$850.00
034 Motorsport - Audi S3 8V Tuning - Stage 1 & 2 ECU Tunes + MQB DQ250 DSG / TCU tunes. 034 Motorsport Performance ECU Software is now available for all Australian spec...

Select Additional Products

$850.00
×

$150.00

$550.00

$80.00
Total:
$0.00

034 Motorsport - Audi S3 8V Tuning - Stage 1 & 2 ECU Tunes + MQB DQ250 DSG / TCU tunes.

034 Motorsport Performance ECU Software is now available for all Australian spec Audi 8V S3. These vehicles come equipped with EA888.3 engine and IS38 turbo. The potential additional power on offer is simply outstanding!

What's even better your ECU & DSG tune is flashed directly through the factory OBD-II port using your 034Motorsport Dynamic+ End User Flashing Kit. This must be purchased to flash tune your car at home. 034 Software customers can receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software with no additional charges. This is simple, easy and quick.

AUDI S3 8V PERFORMANCE FIGURES

Stock: 280 HP / 380 Nm
Stage 1:
 377 HP / 520 Nm  +100 BHP & 140 Nm
Stage 2: 386 HP / 553 Nm  +110 BHP & 178 Nm

Figures are from 034 Motorsport in-house Mustang AWD Dynamometer. 

E85 ETHANOL

Ethanol blend remaps will be released in 2022.

DSG / TCU TUNING

Add to cart: MQB DQ250 DSG tune - for 6 forward gears (pre-facelift)
Add to cart: DQ 381 DSG tune - for 7 forward gears (2017+)

034 MOTORSPORT DEVELOPMENT VEHICLE

034 develops its products on vehicles they own and drive every day. This is the same for the Audi S3 8V. If you are into a good read you can read everything about the development vehicle.

GET READY TO TUNE YOUR S3!

Using your Dynamic+ software is simple and easy. All you need is the 034 End user flash kit and your laptop. Once you take a read of your stock ECU file, it is sent off to head office via the free included software. You then download your remap and flash tune your ECU. Flashing back to stock is a simple 10 minute task, as is switching between remaps. 95 and 98 RON maps are available with E85 Ethanol maps to be released shortly.

Stage 2 includes FREE crackle map / over run mapped into "dynamic mode".

D+ Flashing Cable

Add to cart: Dynamic+ End User Flashing Kit then add your ECU software.

FEEL THE POWER!

STAGE FUEL MAX HP MAX TQ MAX HP GAIN MAX TQ GAIN REV LIMITER SPEED LIMITER
Stock 95 RON 290 HP 380 NM NA NA 6,800 RPM 150 MPH
Stage 1 95 RON 351 HP 520 NM 68 HP @ 5,270 RPM 139 NM @ 3,225 RPM 7,100 RPM
Stage 1 98 RON 377 HP 542 NM 87 HP @ 5,270 RPM 161 NM @ 3,225 RPM 7,100 RPM
Stage 2 98 RON 383 HP 521 NM 90 HP @ 6,350 RPM 147 NM @ 4,100 RPM 7,100 RPM
Stage 2 98 RON 386 HP 553 NM 102 HP @ 4,150 RPM 178 NM @ 4,100 RPM 7,100 RPM


034's proprietary calibrations for the Simos 18 ECU safely and effectively increase the power output of the 2.0T Gen 3 engine. The result is a noticeable improvement in acceleration and throttle response, without any sacrifice in driveability or reliability. 034 ECU Performance Software was developed entirely in-house on 034Motorsport's development 8V Audi S3. As with all 034 software a huge amount of time has gone into testing and development.

AUDI S3 8V STAGE 1 ECU TUNE

034Motorsport stage 1 performance software for the EA888 Gen 3 2.0 TSI/TFSI engine is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost while optimizing timing and fuelling maps to extract additional power from the 2.0T engine.

Stage 1 Performance Software features a higher redline of 7,100 RPM, resulting in a broader, more usable powerband. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in order to provide improved throttle response and allow for more precise throttle modulation and further control of the vehicle when driving on track.

We recommend you pair stage 1 with DSG / TCU tune.

AUDI S3 8V STAGE 2 ECU TUNE

034Motorsport Stage 2 Performance Software for the EA888 Gen 3 2.0 TSI/TFSI engine is engineered to further increase horsepower and torque with the addition of a high-flow downpipe upgrade and performance air intake. 034Motorsport's calibrations optimize the factory ECU for these hardware modifications in order to extract additional power from the 2.0T engine.

Stage 2 Performance Software features a higher redline of 7,100 RPM, resulting in a broader, more usable powerband. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in order to provide improved throttle response and allow for more precise throttle modulation and allow for further control of the vehicle when driving on track.

Stage 2 Performance Software features FREE Crackle Overrun in Dynamic Mode, which produces nice pops and crackles from the exhaust during deceleration. 

We recommend you pair stage 2 with DSG / TCU tune.

ECU SOFTWARE FEATURES

Dyno Proven Gains
Increased Horsepower & Torque Throughout the Powerband
Acceleration Enhancements
Improved Power Delivery, Acceleration, and Driving Characteristics
Multiple Octane Support
Available in 95 Octane and 98 Octane Calibrations
Faster Throttle Response & Improved Precision
Refined Throttle Mapping for Enhanced Throttle Response & Precision
Raised Rev Limit
Raised RPM Limit for Broader Powerband
Speed Limiter Removed
Speed Limiter Removed for Increased Top Speed
Crackle Overrun
Crackle Overrun Enabled in Dynamic Mode for Stage 2
Port Flashing
Flashed Directly Via the Factory OBD-II Port

034MOTORSPORT EA888 2.0T GEN 3 PERFORMANCE SOFTWARE HARDWARE REQUIREMENTS

STAGE FUEL REQUIRED MODIFICATIONS RECOMMENDED MODIFICATIONS
Stage 1 95 RON No hardware required Intake, Intercooler, Res-X, DSG Software, Turbo intake elbow 
Stage 1 98 RON No hardware required Intake, Intercooler, Res-X, DSG Software, Turbo intake elbow
Stage 2 98 RON Downpipe, Intake Intake, Intercooler, Res-X, DSG SoftwareTurbo intake elbow

  
034MOTORSPORT DYNAMIC+ END USER FLASHING KIT

034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.

Requirements for End User Flashing:

  • Windows 7 or Windows 10 Laptop with Available USB Port
  • Power Supply for Laptop
  • Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
  • CTEK Trickle Charger (Or Similar)
  • Available Electrical Outlets

034Motorsport End User Flashing Kit Contents:

  • 034Motorsport OBD-II Adapter
  • USB-A to USB-B Cable
  • Carrying Case
  • User Credentials (Provided Via Email)

Please note you will need the Dynamic+ End user flash kit, to install your tune. You can then add on your ECU software tune and or DSG / TCU tune. This kit can be used for multiple vins and can be used to install ECU and TCU software.

* American fuel ratings work differently to Australia - all remaps will be for 98 RON unless requested.

Read More
Read Less
Please fill out this form and we will reply to you

Please allow 24-48 hours for us to pack and dispatch your order.

We ship from Western Sydney, Australia wide. We choose the best option from a variety of premium carriers to ensure the fastest delivery to your location. We use only express services and air freight (where available).

Estimated delivery times (from time of dispatch):

Location 

Post Codes 

Estimated delivery time in working days 

NSW & ACT 

Sydney Metro 

2000-2234 

2745-2751 

1 Day 

NSW Other Metro including ACT (Canberra, Newcastle, Wollongong, Bathurst, Orange, Dubbo, etc.) 

 

1-2 days 

NSW Country 

 

2-4 Days 

VIC 

Melbourne Metro 

3000-3208 

1 Day 

VIC Other Metro (Albury, Bendigo, Shepparton) 

 

2-3 Days 

VIC Country 

 

2-4 Days 

QLD 

Brisbane Metro 

 

1 Day 

QLD Metro Other (Gold Coast, Sunshine Coast, Mackay,  

 

1-2 Days 

TAS 

Hobart & Launceston Metro 

 

1 Day 

TAS Country 

 

2-3 Days 

SA 

Adelaide Metro 

 

1 Day 

SA Country 

 

2-3 Days 

WA 

Perth Metro 

 

2 Days 

WA Metro Other (Bunbury, Albany) 

 

2-3 Days 

WA Country 

 

3-5 days 

NT 

Darwin Metro 

 

1-2 Days 

NT Country 

 

3-5 Days 

You will receive SMS and email notifications when the item is dispatched. You will then be able to track your order.

We only use express and premium suppliers so we can get the shipment to you as fast as possible.

If you require immediate urgent overnight shipping its best to contact us.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jon
034 ECU SOFTWARE is some of the worlds best

dont be fooled by all the junk out there, choose a company who races, who is passionate and who is not just in it for the money. It is clear 034 puts a huge amount of engineering and testing into their ECU files and it shows. These files are some of the best i've ran. Their support and product knowledge is second to none. This is a core brand with high quality product for a reasonable price. Best of all do it yourself at home and dont bother with any dealer workshop politics.

Your cart

×

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods