034-502-0007-5 CLUTCH KIT,7A SB Clutch w/ 034

034-502-0007-5
Pre order
Transmission and Drivetrain
Australia wide - Express
$2,740.00
This clutch kit is for the Audi Coupe Quattro/S2/RS2/S4/80/90 and includes one of our 12lb, 5 cylinder aluminum flywheels.  Will also fit any Audi 5-cylinder motor with 01A...

034-502-0007-5 CLUTCH KIT,7A SB Clutch w/ 034

This clutch kit is for the Audi Coupe Quattro/S2/RS2/S4/80/90 and includes one of our 12lb, 5 cylinder aluminum flywheels.  Will also fit any Audi 5-cylinder motor with 01A or 01E Gearbox (will NOT fit 016 variant gearboxes). This is a great, streetable setup with FAST revving in gears 1-3, also greatly improved rev-matching abilities for heel-toe shifting. We really love the Stage 3 Daily for a great dual street/track setup for applications up to 450HP, a sprung disk means no chatter and smooth drivability.

FITMENT GUIDE

  • Audi S2, 1991-1995, 3B
  • Audi Coupe Quattro 1990-1991, 7A
  • Audi 80, 90 Quattro, 7A, NG, NF
  • Audi RS2, 1994-1995, ABY, ADU (note remove transmission spacer)
  • Audi S4, 1991-1994, AAN

Kit includes everything needed to install - new pilot bearing, Throwout Bearing as well as proper flywheel bolts for the installation.

SS Kits

SS Stage 3 - (KF772-SS-O) - Daily: The Stage 3 SS-O Organic kits contain an extreme clamp load pressure plate and heavy duty organic disc. The discs feature premium woven medium metal content organic linings. This friction material has a 9,000 RPM burst and dissipates heat quicker than any other organic lining on the market. Also included in the kit are a throw-out bearing, pilot bearing, and alignment tool. Torque Rating: 400 ft/lbs

SS Stage 3 - (KF772-SS-TZ) - Endurance: The Stage 3 SS-TZ Kevlar kits contain an extreme clamp load pressure plate and heavy duty kelvar disc. The metal backed kevlar linings provide a smooth engagement and have the torque capacity to handle high horse power, high revving engines. The disk is rated to 12,000rpm. These clutch kits maintain a stock feel at the pedal and have unmatched durability. Also included in the kit are a throw out bearing, pilot bearing, and alignment tool. Torque Rating: 425 ft/lbs

SS Stage 4 - (KF772-SS-X) - Extreme: The Stage 4 SS-X Feramic kits are the ultimate when it comes to delivering maximum torque to the street and strip driven car. With feramic on both sides of the disc, the clutch delivers a more positive engagement. Because feramic clutch material dissipates heat extremely fast it will give you maximum clutch life and a consistent feel each time you shift. Torque Rating: 505 ft/lbs

Please select the desired clutch above.

Note about break-in: This clutch uses a heavy duty clutch disc that performs well in very high torque use that produce extreme shear forces and heat.  In order to gain this performance advantage, the disc friction material is much harder and more robust than the typical OEM organic disc. In addition, the disc backing plate, what the friction material is riveted to, is much more rigid.  OEM clutch discs use a type of belleville spring washer to allow the disc to compress and be compliant when being clamped between the pressure plate and flywheel friction surfaces.  These high performance clutches, however, use a solid steel backing plate which does not compress at all, this type of construction gives the disc its incredible strength, but means that the disc will require more break-in time than the compliant OEM counterpart.  Keep in mind that this clutch may have trouble fully disengaging the first time it's used, and will require much more break-in than the OEM clutch to achieve normal use.  Typically up to 1000 miles of use is normal to get full break-in. Be sure break-in use consists of generous stop and go as well as shifting, the slipping action as the clutch is engaged is what facilitates the break-in process.  Ultimately the break-in process is one that allows the clutch disc to conform to the pressure plate and flywheel friction surfaces, once these surfaces conform to each other they perform very well and offer the maximum clutch holding power possible. Be patient with initial use and driving and you'll be rewarded with an incredible performing clutch system!

Read More
Read Less
Please fill out this form and we will reply to you

Please allow 24-48 hours for us to pack and dispatch your order.

We ship from Western Sydney, Australia wide. We choose the best option from a variety of premium carriers to ensure the fastest delivery to your location. We use only express services and air freight (where available).

Estimated delivery times (from time of dispatch):

Location 

Post Codes 

Estimated delivery time in working days 

NSW & ACT 

Sydney Metro 

2000-2234 

2745-2751 

1 Day 

NSW Other Metro including ACT (Canberra, Newcastle, Wollongong, Bathurst, Orange, Dubbo, etc.) 

 

1-2 days 

NSW Country 

 

2-4 Days 

VIC 

Melbourne Metro 

3000-3208 

1 Day 

VIC Other Metro (Albury, Bendigo, Shepparton) 

 

2-3 Days 

VIC Country 

 

2-4 Days 

QLD 

Brisbane Metro 

 

1 Day 

QLD Metro Other (Gold Coast, Sunshine Coast, Mackay,  

 

1-2 Days 

TAS 

Hobart & Launceston Metro 

 

1 Day 

TAS Country 

 

2-3 Days 

SA 

Adelaide Metro 

 

1 Day 

SA Country 

 

2-3 Days 

WA 

Perth Metro 

 

2 Days 

WA Metro Other (Bunbury, Albany) 

 

2-3 Days 

WA Country 

 

3-5 days 

NT 

Darwin Metro 

 

1-2 Days 

NT Country 

 

3-5 Days 

You will receive SMS and email notifications when the item is dispatched. You will then be able to track your order.

We only use express and premium suppliers so we can get the shipment to you as fast as possible.

If you require immediate urgent overnight shipping its best to contact us.

Your cart

×

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods